Description
The TRIG 2000 system is designed to convert input electric signals into optical signals, distribute them and convert them back into electric signals. Two lines are available (milisecond trigger channel and microsecond trigger channel). Moreover, the output signals can be delayed. Finally, the delay between the microsecond electric signal and optical sync signal (laser pulse) is measured and indicated. Input trigger signals are counted and indicated. All devices operate in battery mode during measurement, this mode is triggered externally.
Parameters
Input box
|
Input signal 1 |
200 V |
|
Duration of input signal 1 |
typ. 1 ms |
|
Input signal 2 |
200 V |
|
Duration of input signal 2 |
typ. 1 µs |
|
Wavelength of optical output |
1310 nm |
|
Optical output power |
1 mW |
|
No of distribution outputs |
3 |
|
Input connectors |
BNC |
|
Optical connectors |
FC / PC |
|
Power |
230 VAC, 50/60 Hz |
|
Power line system |
1/N/PE |
Output box
|
Duration of input signal 1 |
typ. 1 ms |
|
Duration of input signal 2 |
typ. 1 µs |
|
Wavelength of optical output |
1310 nm |
|
Optical output power |
1 mW |
|
Input connectors |
FC/PC and FC/APC (laser) |
|
Output connectors |
BNC |
|
Output voltage |
TTL / +5V / 50 Ω |
|
Laser input signal |
1310 nm / 300 ps |
|
Power |
230 VAC, 50/60 Hz |
|
Power line system |
1/N/PE |
|
Dimension |
19″ × 1U × 250 mm (483 × 44 × 250 mm) |
|
Weight |
3 kg |
